YASKAWA DX200 - Page 337

8-250
182582-1CD
182582-1CD
8 System Setup
8.23Safety Logic Circuit
MH900, DX200 Controller
4. When the file update is completed, the status in the title line is
changed to “DONE” and the safety logic circuit is executed. While the
safety logic circuit is executed, the signal status (“ ᇲ ” or “●”) is
displayed.
8.23.4.13 Sample of the Safety Logic Circuit Expansion Function
a. Create the one-second one-shot output signal in the safety logic circuit.
Create the safety logic circuit in which the machine safety universal safety
output (#1 GSOUT1) signal is ON for one second.)
1. Select {SAFETY FUNC.}-{TIMER DELAY}.
The safety logic circuit is
being executed.
337 of 552