YASKAWA DX200 - Page 393

9-7
182582-1CD
182582-1CD
9 System Backup
9.2 Backup by CMOS.BIN
MH900, DX200 Controller
5. Select {LOAD}.
– The load display appears.
– The items marked with “” cannot be selected.
6. Select {CMOS}.
– The confirmation dialog box appears.
7. Select {YES}.
– The loaded CMOS.BIN file contents are reflected in the data inside
the robot.
When the “CMOS load” is performed, the current CMOS data is
replaced with the CMOS data (the contents of “CMOS.BIN”) in the
CompactFlash. Therefore, before performing the load, make sure to
perform the “CMOS Save” of the CMOS data to be loaded.
393 of 552