9 System Backup
9.4 Loading the Backup Data from the CompactFlash
9-32
182582-1CD
182582-1CD
MH900, DX200 Controller
15. Select [YES].
Note that executing “SYSTEM RESTORE” or “SYSTEM RESTORE
(YCP21)” replaces the current CMOS data with the data of the file
“CMOSBK.BIN” or “CMOSBK??.BIN” (?? denotes figures) in the
CompactFlash.
After “CMOSBK.BIN” has been loaded, check if the new data is the
same as the previously saved data in the CMOS, and call the master
job to confirm that the current manipulator position is correct and safe.
Then, start moving the manipulator.
To Next Page
Loading...
