YASKAWA DX200 - Page 425

11-2
182582-1CD
182582-1CD
11 Programming Pendant
11.1Disconnection Function
MH900, DX200 Controller
3. Select “YES” to disconnect the communication between the controller
and the programming pendant. After disconnecting the
communication, the message is displayed.
4. Press “OK” on the message dialog, otherwise the window is closed
automatically after 10 seconds since the window appears on the
screen, and then the programming pendant startup window is
displayed.
When connecting the controller and the programming pendant again,
press “Connect to DX200” button.
425 of 552