12-3
182582-1CD
182582-1CD
12 Modification of System Configuration
12.1Addition of I/O Modules
MH900, DX200 Controller
– The confirmation dialog box is shown.
9. Select {YES}.
– The system parameters are then set automatically according to the
current mounted hardware status, and the window will be changed
to the external I/O setup window.
If there is a difference between the displayed contents and
the actual mounted status, confirm the status again. If the
status is correct, the I/O module may be defective: in such a
case, contact your Yaskawa representative.
To Next Page
Loading...
