Safety
Explanation of Warning Labels
viii
182582-1CD
182582-1CD
MH900, DX200 Controller
Explanation of Warning Labels
The following warning labels are attached to the controller.
Always follow the warnings on the labels.
Also, an identification label with important information is placed on the
body of the controller. Prior to operating the controller, confirm the
contents.
Fig. : Warning Label Locations
WARNING
WARNING
HIGH VOLTAGE
DO NOT OPEN DOOR
WITH POWER ON
DISCONNECT AND LOCKOUT
MAIN POWER BEFORE
SERVICING
ENSURE DOOR LATCHES
WARNING
HIGH VOLTAGE
DO NOT OPEN DOOR
WITH POWER ON
DISCONNECT AND LOCKOUT
MAIN POWER BEFORE
SERVICING
ENSURE DOOR LATCHES
ARE SECURELY LOCKED
Arc Flash Hazard
Appropriate PPE Required
Do not operate controls or open covers without
appropriate personal protectoin equipment.
Failure to comply may result in injury or death!.
HIGH VOLTAGE
DO NOT OPEN DOOR
WITH POWER ON
DISCONNECT AND LOCKOUT
MAIN POWER BEFORE
SERVICING
ENSURE DOOR LATCHES
ARE SECURELY LOCKED
HIGH VOLTAGE
DO NOT OPEN DOOR
WITH POWER ON
DISCONNECT AND LOCKOUT
MAIN POWER BEFORE
SERVICING
ENSURE DOOR LATCHES
ARE SECURELY LOCKED
WARNING
Arc Flash Hazard
Appropriate PPE Required
Do not operate controls or open covers without
appropriate personal protectoin equipment.
Failure to comply may result in injury or death!.
$
$6(&7,21$$
To Next Page
Loading...
