YOKOGAWA ADMAG TI Series User Manual

<6. Parameter Lists>
172
IM 01E21A02-03EN
Relative
Index
Index Parameter Name Default Value
Write
Mode
Description
41 1041 ITK_VER 6 -
VersionnumberoftheFFcertication
test(interoperabilitytest)byFieldbus
Foundation applied to this product.
42 1042
COMPATIBILITY_
REV
2 -
Indicates the lower revision compatible
with the device DevRev.
43 1043 CAPABILITY_LEV 0 -
Indicates capability level inside the
device.
44 1044 FD_VER 1 -
Indicates the major version value of
diagnosisspecicationofthedevice.
45 1045 FD_FAIL_ACTIVE 0x00000000 -
Parameterassignedto“Failed”bythe
NAMURNE-107classication.For
detailsaboutbitassignment,referto■
Field Diagnostic.
46 1046
FD_OFFSPEC_
ACTIVE
0x00000000 -
Parameterassignedto“O󰀨
Specication”bytheNAMURNE-107
classication.Fordetailsaboutbit
assignment,referto■FieldDiagnostic.
47 1047
FD_MAINT_
ACTIVE
0x00000000 -
Parameterassignedto“Maintenance”
bytheNAMURNE-107classication.
For details about bit assignment, refer to
■FieldDiagnostic.
48 1048
FD_CHECK_
ACTIVE
0x00000000 -
Parameterassignedto“CheckFunction”
bytheNAMURNE-107classication.
For details about bit assignment, refer to
■FieldDiagnostic.
49 1049 FD_FAIL_MAP 0xFC000000 AUTO
SpeciesabittoassigntoFD_FAIL_
ACTIVE,parameterindicating“Failed”,
among 32-bit alarms appearing on
FD_SIMULATE.DiagnosticValue. For
detailsaboutbitassignment,referto■
Field Diagnostic.
50 1050
FD_OFFSPEC_
MAP
0x00003800 AUTO
SpeciesabittoassigntoFD_
OFFSPEC_ACTIVE, parameter
indicating“O󰀨Specication”among32-
bit alarms appearing on FD_SIMULATE.
DiagnosticValue. For details about bit
assignment,referto■FieldDiagnostic.
51 1051 FD_MAINT_MAP 0x000003E0 AUTO
SpeciesabittoassigntoFD_
MAINT_ACTIVE, parameter indicating
“Maintenance”,among32-bitalarms
appearing on FD_SIMULATE.
DiagnosticValue. For details about bit
assignment,referto■FieldDiagnostic.
52 1052 FD_CHECK_MAP 0x01FF8008 AUTO
SpeciesabittoassigntoFD_
CHECK_ACTIVE,parameterindicating
“CheckFunction”,among32-bit
alarms appearing on FD_SIMULATE.
DiagnosticValue. For details about bit
assignment,referto■FieldDiagnostic.
53 1053 FD_FAIL_MASK 0x00000000 AUTO
Speciesabitnottonotifytothehost
among32-bit“Failed”alarmsappearing
on FD_FAIL_ACTIVE. For details
aboutbitassignment,referto■Field
Diagnostic.
54 1054
FD_OFFSPEC_
MASK
0x00000000 AUTO
Speciesabitnottonotifytothehost
among32-bit“O󰀨Specication”alarms
appearing on FD_OFFSPEC_ACTIVE.
For details about bit assignment, refer to
■FieldDiagnostic.
55 1055
FD_MAINT_
MASK
0x00000000 AUTO
Speciesabitnottonotifytothehost
among32-bit“Maintenance”alarms
appearing on FD_MAINT_ACTIVE. For
detailsaboutbitassignment,referto■
Field Diagnostic.

YOKOGAWA ADMAG TI Series Specifications

General

Brand	YOKOGAWA
Model	ADMAG TI Series
Category	Measuring Instruments
Language	English