YOKOGAWA ADMAG TI Series User Manual

<6. Parameter Lists>
185
IM 01E21A02-03EN
Label
Value
Selection
Parameter Name Display
F
OUNDATION
Fieldbus
Display
F
OUNDATION
Fieldbus
PULSING_FLOW Pulsingow Pulsing Flow 0 No No
1 Yes Yes
POWER_SYNCH Powersyncon/o󰀨 Power Synchronize 0 O󰀨 No
1 On Yes
DENSITY_SEL Value select Density Select 0 Fixed value Fixed value
1 Correction value Correction value
DENSITY_UNIT Density►Unit Density Unit 0 kg/m³ kg/m
3
1 lb/gal lb/gal
2 lb/cf lb/cf
LIMIT_STS_VEL1_
ACT_DIRECTION
- Lmt Sts Velo1 Act Dir 0 - Low limit
LIMIT_STS_VEL2_
ACT_DIRECTION
- Lmt Sts Velo2 Act Dir 1 - High limit
LIMIT_STS_VOL1_
ACT_DIRECTION
- Lmt Sts Vol1 Act Dir
LIMIT_STS_VOL2_
ACT_DIRECTION
- Lmt Sts Vol2 Act Dir
LIMIT_STS_
MASS1_ACT_
DIRECTION
- Lmt Sts Mass1 Act
Dir
LIMIT_STS_
MASS2_ACT_
DIRECTION
- Lmt Sts Mass2 Act
Dir
LIMIT_STS_CAL1_
ACT_DIRECTION
- Lmt Sts Cal1 Act Dir
LIMIT_STS_CAL2_
ACT_DIRECTION
- Lmt Sts Cal2 Act Dir

YOKOGAWA ADMAG TI Series Specifications

General

Brand	YOKOGAWA
Model	ADMAG TI Series
Category	Measuring Instruments
Language	English