YOKOGAWA MW100 User Manual

3-4
IM MW100-01E
Switching Modes
The MW100 has a Measurement mode and a Setting mode, and the mode must be
changed depending on the operation to be performed.
Switch between Measurement
and Setting modes.
For the operating procedure, see section 3.3, “System Settings.”
For a description of the mode transition, see section 3.12, “Starting and Stopping
Measurement, Computation, and Recording.”
Meas. Mode
To Single Screen or Dual Screens for the monitor, switch to Measurement mode. Meas.
Mode (Measurement Mode) is indicated for items that require you to switch Measurement
Mode in the procedural explanation of chapter 3.
Setting Mode
To modify channel settings, system settings, display settings, or communication settings,
switch to Setting mode. Setting Mode is indicated for items that require you to switch to
Setting Mode in the procedural explanation of chapter 3.
3.1 Connection Environment

YOKOGAWA MW100 Specifications

General

Brand	YOKOGAWA
Model	MW100
Category	Data Loggers
Language	English