YOKOGAWA MW100 User Manual

3-47
IM MW100-01E
Setting and Data acquisiton
3
Mail Client Settings
These settings configure the e-mail function. The setting screen contains mail client
setting 1 and mail client setting 2.
Mail Client Setting 1
1.
From the top screen, click Communication Setting > Mail Client Setting 1.
2.
Select the SMTP Client Function check box. This enables e-mail transmission.
3.
Enter the name of the SMTP server in the Server Name box under SMTP Server.
4.
Enter the SMTP server port number in the Port box under SMTP Server.
5.
Enter the name of the POP3 server in the Server box under POP3 Server.
6.
Enter the POP3 server port number in the Port box under POP3 Server.
7.
To require authorization (POP before SMTP) when sending e-mail, select POP3 in
the User Authorization list. This enables entry of the User Authorization items.
8.
Enter the name for logging into the POP3 server in the User box under User
Authorization.
9.
Select the Password check box under Authentication, and then enter the
password for accessing the POP3 server in the Password box.
If you do not select the check box, you cannot enter the password.
10.
Click the Apply button. The setting changes take effect.
3.13 Network Utility Settings

YOKOGAWA MW100 Specifications

General

Brand	YOKOGAWA
Model	MW100
Category	Data Loggers
Language	English