3-45
IM MW100-01E
Setting and Data acquisiton
3
Checking the Operating Status of the MW100 Using the Status Indicators
You can confirm the operational status of the MW100 by viewing the status indicators on
the front panel.
MEASURE
Behavior Color Indication
Off -- Setting mode
On Green Measurement mode
RECORD
Behavior Color Indication
Turning Off -- Recording stopped
On Green Recording
Blinking Green Transitioning from recording to recording stop
ALARM
Behavior Color Indication
Turning Off -- No alarm
On Red Alarm active or alarm hold
MATH
Behavior Color Indication
Turning Off -- Computation stopped
On Green Computing
Blinking Green Transitioning from computing to computing
stopped
3.12 Starting and Stopping Measurement, Computation, and Recording
To Next Page
Loading...
