YOKOGAWA MW100 - Delay Alarm Setting

3-33
IM MW100-01E
Setting and Data acquisiton
3
Delay Alarm Setting
Set the delay time for using the delay alarm.
1.
From the top screen, click System Setting > Delay Alarm Setting.
2.
In the Channel List list, select the channels you want to set.
3.
Enter the delay time in the range of 1 to 3600 (s) in the Time box of the channel
number you want to set. Set the time so that it is an integer multiple of the
measurement or MATH interval.
4.
Click the Apply button. The setting changes take effect.
3.7 Setting Alarms