YOKOGAWA MW100 - Time Synchronization Client Settings

3-49
IM MW100-01E
Setting and Data acquisiton
3
Time Synchronization Client Settings
Enter these settings to automatically synchronize the time.
1.
From the top screen, click Communication Setting > SNTP Client Setting.
2.
Select the SNTP Client Function check box to enable the function.
3.
Enter the name of the NTP server in the Server box under SNTP Server.
4.
Enter the SNTP server port number in the Port box.
5.
Enter a reference time to be queried Ref.Time box under Query Action. Next,
select a query time interval in the Interval list.
6.
Click the Apply button. The setting changes take effect.
3.13 Network Utility Settings