YOKOGAWA MW100 User Manual

3-48
IM MW100-01E
Mail Client Setting 2
1.
From the top screen, click Communication Setting > Mail Client Setting 2.
2.
Enter the subject of the e-mail in the Subject box under Mail Header. Up to thirty-
two alphanumeric characters can be input.
3.
Enter the sender mail address in the Sender box.
4.
Enter the recipient address in the Recipient 1 box. Enter the address for
Recipient 2 in the same manner. You can specify multiple addresses for each
recipient. Separate each address with a space. You do not have to set both
recipients. Use up to 150 alphanumeric characters.
5.
To set up alarm notification, select an address for alarm notification in the Alarm
Notification list. 1_2 sends notification to both recipient 1 and 2.
6.
Enter an alarm notification channel in the Alarm Channel Set box under Alarm
Notification. To add instantaneous values, select the Instantaneous Data check
box. Specify channel numbers by delimiting them with dots as in 001.003.005, or
specify a range as in 004-008.
7.
To attach instantaneous values, select the Instantaneous Data check box.
8.
To set up notification of data file creation, select a notification address in the File
Creation Notification list.
9.
In the same manner as in step 7, set Media Alarm Notification , Power Failure
Notification , and System Error Notification.
10.
To set up Periodic Report notification, select an address for notification in the
Periodic Report list.
11.
Select transmission interval time from the Interval box under Periodic Report.
12.
Enter a reference time for the send interval in the Time box under Periodic
Report.
13.
To attach instantaneous values to Periodic Report, select the Instantaneous
Data check box.
14.
Click the Apply button. The setting changes take effect.
3.13 Network Utility Settings

YOKOGAWA MW100 Specifications

General

Brand	YOKOGAWA
Model	MW100
Category	Data Loggers
Language	English