YOKOGAWA MW100 User Manual

2-6
IM MW100-01E
2.4 Connecting Signal Wires
Terminal Arrangement Markings on the Terminal Cover
Characters indicating the terminal function and a terminal symbol indicating the type of
signal to be input/output to each terminal are written on the back of the terminal cover
of each I/O module. For information on wiring of corresponding terminal signals, see the
wiring procedures in this section. The 4-CH Medium-Speed Strain Module (-NDI) does
not have a terminal cover.
4-CH, High-Speed
Universal Input Module
10-CH, Medium-Speed
Universal Input Module
4-CH, Medium-Speed
Strain Input Module
(-B12, -B35)
6-CH, Medium-Speed
4-wire RTD Resistance Input Module
10-CH, High-Speed
Digital Input Module
(-D05, -D24)
Channel number
within module
Terminal
symbol
10-CH, Medium-Speed
Digital Output Module
8-CH, Medium-Speed
Analog Output Module
8-CH, Medium-Speed
PWM Output Module
Terminal
cover
100Vpk MAX TO
250V MAX CH TO CH
600V MAX TO
100Vpk MAX TO
120V MAX CH TO CH
600V MAX TO
100Vpk MAX TO
120V MAX CH TO CH(DCV-DI)
50V MAX CH TO CH(RTD-OHM)
600V MAX TO
10Vpk MAX H TO L
30V MAX CH TO CH
250V MAX TO
250V MAX CH TO CH
250V MAX NO TO C
250V MAX TO
10Vpk MAX TO
250V MAX TO
250V MAX TO
Display for
-D05
VextVext
Connect external power supply
to only one set of Vext terminals.
250V MAX TO
VextVext
Connect external power supply
to only one set of Vext terminals.

YOKOGAWA MW100 Specifications

General

Brand	YOKOGAWA
Model	MW100
Category	Data Loggers
Language	English