YOKOGAWA MW100 - Measurement Interval, Integration Time, and Filter; Measurement Synchronization

1-31
IM MW100-01E
Explanation of Functions
1
Resistance Temperature Detector (2 mA, cont.)
Measurement Range Notation Rated Measurement Range
Pt100 (high noise resistance) Pt100-2R –200.0 to 250.0°C
JPt100 (high noise resistance) JPt100-2R –200.0 to 250.0°C
Cu100 GOST Cu100G –200.0 to 200.0°C
Cu50 GOST Cu50G –200.0 to 200.0°C
Cu10 GOST Cu10G –200.0 to 200.0°C
DI
Measurement Range Notation Rated Measurement Range
LEVEL LEVEL Vth=2.4V
Contact input CONTACT 100 Ω or less, ON, 10 kΩ or less, OFF
Measurement Interval, Integration Time, and Filter
You can select from the following measurement intervals for this module.
10 ms, 50 ms, 100 ms, 200 ms, 500 ms, 1 s, 2 s, 5 s, 10 s, 20 s, 30 s, 60 s
The integral time and types of filters applied vary depending on the measurement
interval. For details, see section 2.9, “Measures against Noise on the MW100 Data
Acquisition Unit.”
Measurement Synchronization
Measurement is synchronized on each channel.
1.4 Functions of the 4-CH, High-Speed Universal Input Module