YOKOGAWA MW100 User Manual

3-24
IM MW100-01E
Computation Settings
Specify computation settings to perform linear scaling or differential computation between
channels.
1.
From the top screen, click System Setting > AI/DI Channel Setting.
2.
In the Calc list, select Scale for linear scaling or Delta for differential computation
between channels.
• Linear Scaling Settings
Set this item when linearly scaling the measured values.
3.
Enter the lower or upper limit of scale in the Lower or Upper box under Scale.
4.
Select the decimal place from the D.P. list under Scale.
5.
Enter the scale conversion value in the Unit box.
• Settings of Differential Computation between Channels
6.
Enter the reference channel number in the Reference box.
7.
Click the Apply button. The setting changes take effect.
3.5 Setting Measurement Conditions indstop (indstart Measurement Channel Settings)

YOKOGAWA MW100 Specifications

General

Brand	YOKOGAWA
Model	MW100
Category	Data Loggers
Language	English