YOKOGAWA MW100 User Manual

1-12
IM MW100-01E
• In-Progress Display
The following displays cycle while the CF card is being accessed or while calibration
is being performed. Do not remove the CF card while it is being accessed.
For the handling of the CF card, see section 2.10, “Handling of the CF Card.”
For CF card replacement, see “Saving Data to the CF Card” in this section.
• Access Forewarning to the CF Card
The dots blink before the CF card is accessed.This indication starts 10 seconds before
the access.If you see this indication, quickly finish the insertion or removal of the CF
card.
In-progress display
Blinking
If you are using the multi interval function, this indication may be shorter than 10
seconds. If the time until the CF card is accessed is less than or equal to 5 s, the time
until access is displayed numerically.
In-progress display
For CF card replacement, see “Saving Data to the CF Card” in this section.
• Non-execution Display
If the file division action is not executed, “--nuLL--” is displayed with the characters
flowing from right to left as shown below. Check the execution condition of the file
division.
1.3 Functions of the Main Module

YOKOGAWA MW100 Specifications

General

Brand	YOKOGAWA
Model	MW100
Category	Data Loggers
Language	English