Zebra ZD620 User Manual

166
Setup
8. If printer power is on, press the FEED button to have the printer advance a minimum
of 20 cm (8 inches) of media to remove slack and ribbon wrinkle (straightens the
ribbon), and to align the ribbon on the spindles. Otherwise, wait to turn on the printer
and complete the printer ‘Getting Started’ instructions in this chapter.
9. Change the print mode setting from direct thermal printing to thermal transfer to set
the printer’s temperature profiles for thermal transfer media. This can be done with
the printer driver, application software, or printer programming commands.
• When controlling printer operations with ZPL programming, refer to the Media
Type (^MT) ZPL II command (follow the instructions in the ZPL Programming
Guide).
• When controlling printer operations with EPL Page Mode, refer to the
Options (O) EPL command (follow the instructions in the EPL Page Mode
Programmer’s Guide).
10. To verify the mode change from direct thermal printing to thermal transfer printing,
use the Test Printing with the Configuration Report to print a configuration label. The
‘PRINT METHOD’ should read ‘THERMAL-TRANS’ on the printer configuration status
label.
Your printer is now ready to print.

Zebra ZD620 Specifications

General

Color	-
Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Maximum print height	- mm
Maximum printing width	104 mm
Flash memory	512 MB
Internal memory	256 MB
Number of fonts	16
Built-in barcodes	1D, 2D, AZTECCODE, CODABAR (NW-7), Code 11, Code 128 (A/B/C), Code 39, Code 49, Code 93, Data Matrix, EAN13, Industrial 2/5, Interleaved 2/5, MaxiCode, Micro QR Code, MicroPDF417, PDF417, POSTNET, QR Code, UPC-A, UPC-E
Page description languages	EPL2, XML, ZBI, ZPL II
Display	LCD
Color display	Yes
Product color	Black, Grey
Display resolution	320 x 240 pixels
Wi-Fi standards	Wi-Fi 5 (802.11ac)
Bluetooth version	4.1
USB 2.0 ports quantity	1
Connectivity technology	Wired & Wireless
Mobile operating systems supported	Android, iOS
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	4.4 - 41 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Media thickness	0.08 - 0.1905 mm
Maximum label length	0.991 m
Maximum roll diameter	127 mm

Weight and Dimensions

Depth	221 mm
Width	177 mm
Height	151 mm