Chapter 2 Hardware
AX/DX/EX/PX Series User’s Guide
37
INTERNET Green On The Zyxel Device has a WAN IP address (either static or assigned by a
DHCP server) and the Internet connection is up.
Blinking The Zyxel Device is sending or receiving traffic.
Red On The Zyxel Device attempted to obtain an WAN IP but failed. Possible
causes are no response from a DHCP server, no PPPoE response,
PPPoE authentication failed.
Off There is no Internet connection or the gateway is in bridge mode.
LAN1-3
Green On The Zyxel Device has a successful Ethernet connection with a device
on the Local Area Network (LAN) port.
Blinking The Zyxel Device is sending or receiving data to/from the LAN port.
Off The Zyxel Device does not have an Ethernet connection on the LAN
port.
LAN4/WAN Green On LAN mode: The Zyxel Device has a successful Ethernet connection
with a device on the LAN4/WAN port.
WAN mode: The Ethernet WAN connection is up on the LAN4/WAN
port.
Blinking The Zyxel Device is sending or receiving data to/from the LAN4/WAN
port.
Off LAN mode: The Zyxel Device does not have an Ethernet connection
with a device on the LAN4/WAN port.
WAN mode: The Ethernet WAN connection on the LAN4/WAN port is
down.
2.4G Green On The 2.4 GHz WiFi is activated.
Blinking The Zyxel Device is sending or receiving data to/from 2.4 GHz WiFi
clients.
Amber Blinking The Zyxel Device is connecting to a 2.4 GHz WiFi client through WPS.
Off The 2.4 GHz WiFi network is not activated.
5G Green On The 5 GHz WiFi network is activated.
Blinking The Zyxel Device is sending or receiving data to/from 5 GHz WiFi
clients.
Amber Blinking The Zyxel Device is connecting to a 5 GHz WiFi client through WPS.
Off The 5 GHz WiFi network is not activated.
Table 8 LED Descriptions (DX3300-T1 and EX-3300-T1) (continued)
LED COLOR STATUS DESCRIPTION
To Next Page
Loading...
Need help?
General
