ZyXEL Communications GS2220 Series - Page 52

Chapter 4 Web Configurator
GS2220 Series User’s Guide
52
7 If you select Sta nda rd Mo de , go directly to step 9.
8 The Se tup Wiza rd screen will appear after selecting the Ne two rke d AV Mode . You can use the Se tup
Wiza rd screen to configure the Switch’s Networked AV mode’s basic or advanced settings (see Section
4.4 on page 58 for details).
• Use the Ba sic Se tting s to configure networked AV operation on management VLAN. Such as the
Switches’ IP address, DNS server, system password, SNMP community, accept or skip the default
Networked AV mode settings, and view a summary of the basic settings.
• Use the Adva nc e d Se tting s for networks that wants to separate networked AV VLAN from
management VLAN, specify which ports connect to AVoIP application, and for setting link
aggregation across switches.
Once you click the Finish button, the settings configured in the Se tup Wiza rd screen will overwrite the
existing settings.
Otherwise, click the Exit button. If you want to open the Se tup Wiza rd screen later, click the Wiza rd icon
in the upper right hand corner of the Web Configurator in Networked AV mode.
Fig ure 36 Web Configurator: Wizard
9 If you did not change the default administrator password and/or SNMP community values, a warning
screen displays each time you log into the Web Configurator and select Sta nda rd Mode . Click Pa sswo rd
/ SNMP to open a screen where you can change the administrator password and SNMP community
string simultaneously. Otherwise, click Ig no re to close it.
If you log into the Web Configurator and select Ne two rke d AV Mo de , open the screen in the Wiza rd >
Ste p 2 Pa sswo rd to change the administrator password and SNMP community string. Click Finish on the
last step of the Wiza rd to save your settings.