Chapter 6 Tutorials
GS2220 Series User’s Guide
89
Fig ure 68 Tutorial: Set VLAN Type to 802.1Q
3 Click Adva nc e d Applic a tio n > VLAN > VLAN C o nfig ura tio n > Sta tic VLAN Se tup.
4 In the Sta tic VLAN screen, select AC TIVE, enter a descriptive name (VLAN 102 for example) in the Na me
field and enter 102 in the VLAN G roup ID field.
5 Select Fixe d to configure port 2 to be a permanent member of this VLAN.
6 Clear the TX Ta g g ing check box to set the Switch to remove VLAN tags before sending.
7 Click Add to save the settings to the run-time memory. Settings in the run-time memory are lost when the
Switch’s power is turned off.
To Next Page
Loading...
