ZyXEL Communications GS2220 Series - Page 93

Chapter 6 Tutorials
GS2220 Series User’s Guide
93
Se tting up the Switc h
1 Open the Web Configurator. Go to the Ma na g e me nt > Ma inte na nc e screen, and click the Clic k He re
button next to the Auto Co nfig ura tio n field.
Fig ure 73 Tutorial: Auto Configuration Screen
2 Select the check box in the Ac tive field to enable auto configuration. Select DHC P in the Mo de field and
click Apply to save your changes.
Fig ure 74 Tutorial: Enable Auto Configuration
3 You need to save the current configuration in a configuration file, so the Switch will load the auto
configuration file from the TFTP server automatically when rebooting. Go to the Ma na g e me nt >
Ma inte na nc e screen. Click the C o nfig 1, C o nfig 2, or C usto m De fa ult button next to the Sa ve
Config ura tio n field.
4 Click the same button next to Re bo o t Syste m field to reboot the Switch, and load the auto configuration
setting as configured before. For example, if you save the auto configuration setting to Co nfig 1, you
need to click the C o nfig 1 button next to the Re b o o t Syste m field.