Chapter 6 Tutorials
GS2220 Series User’s Guide
94
Fig ure 75 Tutorial: Save Configuration and Reboot System
5 Go to the Ma na g e me nt > Syste m Log screen to see if auto configuration was performed successfully.
Fig ure 76 Tutorial: Log
6 Check the screens to see if it is the configuration file you want to load. If it is not, go through the steps
above to check your configurations. If it is, click Sa ve at the top right corner of the Web Configurator to
save the configuration permanently.
Fig ure 77 Tutorial: Save
To Next Page
Loading...
