IGMP Snooping Ethernet Bridge, STP/RSTP
All IP Addresses - if this option is selected, all IPs for All or the selected VLAN are
displayed.
3. Click View. The relevant IP addresses will be displayed along with VID, MAC, Ports and
Type information.
4. You may filter the display according to port type and address type: Dynamic or Static.
In Filter IP Address for Port - choose the ports for which the IP addresses will be
displayed (All displays the addresses for all ports).
In the Type field - choose Dynamic to show only dynamically identified IP addresses
and Static to show only manually defined IP addresses.
NOTE: use the Init button to clear the display.
To Next Page