Management
Actelis elements can be managed through the following range of options:
MetaASSIST View (Registered Trademark) - a Java based Graphical User Interface
(GUI) application used for local and remote management of a connected ML system and
(in case of an ML CO) its hosted ML CPE elements. The application is distributed with
the ML SW (CD) (or in case of ML2300 (SDU-400) is also available in ML file system).
This manual describes the management procedures as performed through the
MetaASSIST View.
If the MetaASSIST View is not already installed on the computer to be used for the
commissioning procedure, install it according to the instructions given in the
MetaASSIST View Installation Guide.
MetaASSIST EMS (Registered Trademark) - a Java-based modular and scalable
Graphical User Interface (GUI) application enabling system-level management to
converging Actelis systems on the entire network. MetaASSIST EMS consists of
MetaASSIST EMS server and MetaASSIST EMS client and requires the MetaASSIST
View application. To obtain these software applications and the MetaASSIST EMS
Online Help contact your local Actelis Networks sales representative, service
representative or distributor.
WEB Access - enables performing basic operation on the system from any standard Web
Browser, embedded with ML SW.
TL1 - intrinsic user interface based on Transaction Language 1 (TL1): a universal
transaction language developed by Telcordia Technologies, Inc. The application is
embedded with ML SW.
CLI - intrinsic user interface based on Cisco-like Command Line Interface. The
application is embedded with ML SW.
SNMP - intrinsic user interface uses standard and Actelis proprietary MIB modules.
SNMP agent embedded with ML SW supports either SNMP v1 or V2c protocol.
To Next Page