Actelis Networks ML700 - Craft Connection to the ML

Craft Connection to the ML Getting Started
ML700 User Manual 2-3
Craft Connection to the ML
Craft sessions are usually used during the setup procedure. After defining the basic
parameters, the unit is accessed remotely. This section briefly discusses how to open a Craft
session. For more information on all the available auto-discovery and session access
parameters, refer to Management Configuration.
The IP of the desired ML can be determined or input using he following options:
 Entering the required IP
 Selecting the IP from the available list of successfully accessed IPs
 Using Auto-discovery (on page 3-7)
All hosted CPEs are automatically displayed under the accessed CO. The user can determine
whether sessions can be opened to the displayed CPEs.
 To open a local session to the ML
1. Interconnect the computer's RS232 port and the ML device front panel Craft port using a
standard RS232 cable.
2. Launch the MetaASSIST application by doing one of the following:
 Click the MetaASSIST View icon on the Desktop, or
 From the Start menu, select Programs> Actelis Networks>MetaASSIST View.
The MetaASSIST Main window opens and the Connect dialog is automatically invoked.