Appendix A - Technical Specifications ML700 Specifications
ML700 Specifications
Table 95: ML700 Specifications
• 10/100Base-TX IEEE 802.3
• 100/1000Base-Fx (option)
2x 100/1000Base-FX - SFP based, MSA compliant
High Speed Link (Bonded copper Pairs)
IEEE 802.3ah 10Pass-TS; ITU-T G.998.2 (G.Bond/Ethernet)
• Modem Line code and supported
profiles
ADSL2 (ITU-T G.992.3): Annex A and Annex M
ADSL2+ (ITU-T G.992.5): Annex A, B, J and Annex M
VDSL2 (ITU-T G.993.2):
o VDSL2 profiles: 8a, 8b, 8c, 8d, 12a, 12b, 17a
o Region A (North America): D32, D48, D64 and D128
o Region B (Europe):
B8_1 (998-M1x-A)
B8_2 (998-M1x-B)
B8_3 (998-M1-NUS0)
B8_4 (998-M2x-A)
B8_5 (998-M2x-M)
B8_6 (998-M2x-B)
B8_7 (998-M2x-NUS0)
B8_8 (998E17-M2x-NUS0)
B8_9 (998E17-M2x-NUS0-M)
B8_10 (998ADE17-M2x-NUS0-M)
B8_11 (998ADE17-M2x-A)
B8_12 (998ADE17-M2x-B)
B8_17 (998ADE17-M2x-M)
Vectoring (ITU-T G.993.5) - ML740-R only
Downlink - up to 500 Mbps
Uplink - up to 250 Mbps
2, 4 or 8 (model dependent)
192kbps to 100Mbps (depending on loop and spectral regulations).
Fast mode: 2-4ms (typical)
Interleaved: up to 63ms interleaving delay
G.inp (G.998.4 retransmission): depending on settings, configurable up
to 63ms retransmission delay
• Impulse Noise Protection
Depending on settings, configurable up to 16 symbols (4ms) in
Interleaved mode and >20ms in G.998.4
• Sealing Current Sourcing
48VDC/1.5mA nominal (On/Off settable)
10E-10 (typical);10E-7 (guaranteed)
According to default/user-defined DMT profiles
as stated in BBF TR-165 to comply with ITU-T G.997.1 standards