Actelis Networks ML700 - RADIUS Service Type Parameters Supported by ML

RADIUS Security Management
ML700 User Manual 12-19
Type
Name
Length
Description
Message(s)
6
Service-Type
The type of service the user has.
Access-Request/
Access-Accept
18
Reply-
Message
Indicates text, which should be
displayed to the user. When used in an
Access-Accept, it is the success
message. When used in an Access-
Reject, it is the failure message.
Access-Accept /
Access-Reject
28
Idle-Timeout
Maximum number of consecutive
seconds of idle time this user should be
permitted before being disconnected by
the ML.
Access-Accept
RADIUS Service Type Parameters Supported by ML
Table 58: RADIUS Service Type Parameters
Value
Type
Description
Notes.
1
Login
The user should be connected to a host.
ML Users with “Read” access
privilege.
6
Administrative
The user should be granted access to the
administrative interface to the NAS from
which privileged commands can be
executed.
ML Users with “Admin”
access privilege.
7
NAS Prompt
The user should be provided a command
prompt on the NAS from which non-
privileged commands can be executed.
ML Users with “Write” access
privilege.