Actelis Networks ML700 - L2 (CoS); L3 (DSCP;ToS) Queuing Priorities

L2 (CoS) / L3 (DSCP/ToS) Queuing Priorities Quality of Service (QoS)
ML700 User Manual 7-7
3. For each class, configure the priority level(s) as follows:
 From the Traffic Class list box, select the traffic class (e.g HH).
 Either configure a single priority using the Priority field, or
 configure a range of priorities using the From Priority and To Priority.
 Click OK. The priority range appears in the table. Multiple ranges in each class are
separated by a comma.
4. Repeat the procedure for additional priority configurations.
5. To restore default priorities, click Set to Default.
NOTE: Unmodified priority values remain at their current values.