SNMP Agent and Trap Parameters Management Configuration
4. In the Destination IP Address box, type the IP address of the SNMP management
system.
5. In the Community String box, type the community string of the SNMP management
system. If an incorrect string is typed, the SNMP management system may not receive
the SNMP traps.
6. In the SNMP version box, select the version of the SNMP used by the management
system. The SNMP version defines the structure of the traps that will be sent to the
SNMP management system.
7. In the Port box, type the SNMP/UDP trap notification port of OSS/NMS host where the
ML device traps are to be received. Click OK.
To Next Page
Loading...