!"
==
User action: Perform the appropriate operation sequence before retrying the
desired motion.
*Illegal operation* (–423)
Explanation: A program instruction has attempted to perform an operation that
is not possible.
User action: Check the instruction executing when the error occurred. Make sure
all conditions necessary for its successful completion are met.
*Illegal .PROGRAM statement* (–467)
Explanation: An attempt has been made to: (1) enter a line other than a
.PROGRAM statement as the first line of a program, or (2) enter a
.PROGRAM statement that contains a syntax error.
User action: Move below the first line of the program, or reenter the line cor-
rectly. (With the V
+
SEE editor, you can press the Undo function key
or press ESC+CTRL+C to cancel the changes you have made to a
.PROGRAM line.)
*Illegal record length* (–528)
Explanation: An FOPEN instruction has specified a record length that is not
acceptable. For example, the value is negative or too large, or the
record length is zero with random-access mode specified.
User action: Edit the program to specify a correct record length or specify
sequential-access mode.
*Illegal use of belt variable* (–466)
Explanation: A belt variable has been used in a context where it is not allowed,
probably in a compound transformation but not at the leftmost posi-
tion.
User action: Edit the program to use the belt variable correctly.
*Illegal user LUN specified* (–527)
Explanation: An I/O instruction has specified a logical unit number (LUN) that is
not defined in the V
+
system, or cannot be accessed in the manner
attempted. (See the description of the ATTACH instruction for a list
of the valid logical unit numbers and the devices to which they
apply.)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
