!"
9=
User action: None. This is an informational message.
*Network connection opened* (100)
Explanation: A new client connection has been established on the given logical
unit.
User action: None. This is an informational message.
*Network connection terminated* (–565)
Explanation: This error occurs when input or output operations are attempted on
a network connection that has already been terminated.
User action: Reestablish the network connection, and retry the original opera-
tion.
*Network error* Code n (value received)
Explanation: An error code between −255 and −1 (inclusive) has been received
from the network. The error code, which does not have meaning to
V
+
, is being reported to the user.
User action: Application dependent. If the indicated code does not having mean-
ing for the current application, check to make sure the remote com-
puter is sending valid data.
*Network node off line* (–538)
Explanation: An attempt has been made to send data to a known network node
that is off-line. Either the node has been disabled, or it is not con-
nected to the network.
User action: Check that the remote node is active and connected to the network.
Check that the local node is connected to the network.
*Network not enabled* (–542)
Explanation: An attempt has been made to access a remote network node, or per-
form certain network functions, when the network is not enabled.
User action: Enable the network and retry the operation.
*Network resource name conflict* (–564)
Explanation: The name specified for an NFS mount matches an existing network
name such as an NFS disk name.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
