!"
91
User action: Choose a different name.
*Network restarted remotely* (–534)
Explanation: V
+
has received a DDCMP start-up message from the remote system
when the protocol was already started. The remote system has prob-
ably stopped and restarted its protocol. The local protocol is
stopped and all pending I/O requests are completed with this error.
User action: (1) Close and reopen the DDCMP line; (2) check the remote program
logic to see why it restarted the protocol.
*Network timeout* (–562)
Explanation: This error occurs when a network transaction is initiated but no
reply is received from the server.
User action: Check network integrity. Make sure the server is up and running.
Make sure the correct IP address is being used.
*NFS error* Code n (–1200 to –1299)
Explanation: Because NFS returns errors that do not have corresponding mean-
ing in V
+
, some NFS errors are reported as a variable NFS error.
Errors in this range have the following interpretation: V
+
error num-
ber –(1200+n) corresponds to NFS error code n. 9 4% ( describes
the currently known NFS error codes that are reported in this way.
Table E-4. NFS Error Message Codes
Code n Explanation
19 No such device.
30 Read-only file system. A write operation
was attempted on a read-only file system.
69 Disk quota exceeded. The client’s disk quota
on the server has been exceeded.
99 The server’s write cache used in the
WRITECACHE call was flushed to disk.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General