Configuring System Features Configuration Reference
11-22 PN: 13000-00205 Rev. N MT8852B Operation Manual
Option number: Enter the option code number from the numeric keypad and then
press the [Enter] key.
Option enable code: Enter your unique option enabling code number from the numeric
keypad and then press the [Enter] soft key. Press the [Enable] soft
key to enable the option.
Follow the procedure below to enable an option.
1. Press > “System features” > “Feature control” > .
2. Press the [1 of 2] soft key.
3. Position the Cursor at "Option number" and press . Enter the option code number
(e.g., 15) from the keypad and press the [Enter] key.
4. Position the cursor at "Option enable code" and press . Enter the unique option
enabling code number from the keypad and press the [Enter] soft key.
5. Press the [Enable] soft key to enable the option.
6. Press the [2 of 2] soft key to return to the previous page and check that the option is now
included in the list of all installed options.
To Next Page
Loading...
