Description of the Software Modules and Parameters
Parameter manual b maXX BM5800
Document No.: 5.16029.03
103
of 814
3
107.34 Lq inductance
Quadrature axis inductance of a synchronous machine.
The value displayed is read from motors with an electronic identification plate and is used
for motor control as a function of parameter
Z123.10–.
107.35 Ld inductance
Direct axis inductance of a synchronous machine.
The value displayed is read from motors with an electronic identification plate and is used
for motor control as a function of parameter
Z123.10–.
107.36 Inertia of motor
Moment of inertia of the motor. The value displayed is read from motors with an electronic
identification plate and is for information only.
107.37 Temperature sensor type
Two different types of temperature sensor are available for use. If the motor has no elec-
tronic identification plate, the temperature sensor type must be entered.
107.38 Motor flags
Value Meaning
0 KTY 84
1 Temperature switch or motor protection thermistor (MSKL)
2 PT1000
15 ... 3 Reserved
Bit Meaning
0 0: Motor phase sequence counter-clockwise
1: Phase sequence clockwise
2 ... 1 00: Synchronous motor
01: Asynchronous motor
10: Interior permanent magnet synchronous motor (IPMSM)
15 ... 3 Reserved
default = 0
To Next Page
Loading...