Baumuller b maXX BM5800 - Page 176

Configuration
Parameter manual b maXX BM5800
Document No.: 5.16029.03 Baumüller Nürnberg GmbH
176
of 814
3.4
137.24 Eprom capacity
Size of the usable OEM memory
137.25 Data storage capacity
Total storage capacity of the encoder
137.26 Defined fields
Only for Stegmann encoders: number of defined OEM memory data fields
137.27 Data field status
Only for Stegmann encoders: status of the defined data fields. See Stegmann manual for
meaning
137.28 Digital resolution
The parameter shows the resolution oft he the digital position in bits per revolution. It is
operated only with rotary encoder with EnDat

- or HIPERFACE

-encoders.
137.29 Position format
The parameter is set at EnDat

- and HIPERFACE

-encoders only.
It displays the resolution of the digital position value, which is read out of the encoder. The
parameter corresponds to the angle resolution at singleturn encoders. The sum of the
resolution of angle and revolutions is displayed at multiturn encoders.
The total resolution of the position value is displayed at length measuring systems.
137.30 Instruction set
The parameter is only valid for EnDat

encoders.
It displays the supported instruction set as well as type specific information of the con-
nected encoder.