Baumuller b maXX BM5800 - Page 235

Description of the Software Modules and Parameters
Parameter manual b maXX BM5800
Document No.: 5.16029.03
235
of 814
3
124.20 Encoder 2 Trigger digital input TP1 neg. Edge Angle
Angle Encoder 2 with triggering of measurement through falling edge at digital input TP1.
124.21 Encoder 2 Trigger digital input TP2 pos. Edge Revolutions
Revolutions Encoder 2 with triggering of measurement through rising edge at digital input
TP2.
124.22 Encoder 2 Trigger digital input TP2 pos. Edge Angle
Angle Encoder 2 with triggering of measurement through rising edge at digital input TP2.
124.23 Encoder 2 Trigger digital input TP2 neg. Edge Revolutions
Revolutions Encoder 2 with triggering of measurement through falling edge at digital input
TP2.
124.24 Encoder 2 Trigger digital input TP2 neg. Edge Angle
Angle Encoder 2 with triggering of measurement through falling edge at digital input TP2.
124.25 Encoder 2 Trigger Zero Pulse pos. Edge Revolutions
Revolutions Encoder 2 with triggering of measurement through rising edge of Zero Pulse
of Encoder 2.
124.26 Encoder 2 Trigger Zero Pulse pos. Edge Angle
Angle Encoder 2 with triggering of measurement through rising edge of Zero Pulse of En-
coder 2.
124.27 Encoder 2 Trigger Zero Pulse neg. Edge Revolutions
Revolutions Encoder 2 with triggering of measurement through falling edge of Zero Pulse
of Encoder 2.