Baumuller b maXX BM5800 - Page 234

Configuration
Parameter manual b maXX BM5800
Document No.: 5.16029.03 Baumüller Nürnberg GmbH
234
of 814
3.4
124.13 Encoder 1 Trigger Zero Pulse pos. Edge Revolutions
Revolutions Encoder 1 with triggering of measurement through rising edge of Zero Pulse
of Encoder 1.
124.14 Encoder 1 Trigger Zero Pulse pos. Edge Angle
Angle Encoder 1 with triggering of measurement through rising edge of Zero Pulse of En-
coder 1.
124.15 Encoder 1 Trigger Zero Pulse neg. Edge Revolutions
Revolutions Encoder 1 with triggering of measurement through falling edge of Zero Pulse
of Encoder 1.
124.16 Encoder 1 Trigger Zero Pulse neg. Edge Angle
Angle Encoder 1 with triggering of measurement through falling edge of Zero Pulse of En-
coder 1.
124.17 Encoder 2 Trigger digital input TP1 pos. Edge Revolutions
Revolutions Encoder 2 with triggering of measurement through rising edge at digital input
TP1.
124.18 Encoder 2 Trigger digital input TP1 pos. Edge Angle
Angle Encoder 2 with triggering of measurement through rising edge at digital input TP1.
124.19 Encoder 2 Trigger digital input TP1 neg. Edge Revolutions
Revolutions Encoder 2 with triggering of measurement through falling edge at digital input
TP1.