Baumuller b maXX BM5800 - Page 233

Description of the Software Modules and Parameters
Parameter manual b maXX BM5800
Document No.: 5.16029.03
233
of 814
3
124.5 Encoder 1 Trigger digital input TP1 pos. Edge Revolutions
Revolutions Encoder 1 with triggering of measurement through rising edge at digital input
TP1.
124.6 Encoder 1 Trigger digital input TP1 pos. Edge Angle
Angle Encoder 1 with triggering of measurement through rising edge at digital input TP1.
124.7 Encoder 1 trigger digital input TP1 neg. edge revolutions
Revolutions Encoder 1 with triggering of measurement through falling edge at digital input
TP1.
124.8 Encoder 1 Trigger digital input TP1 neg. Edge Angle
Angle Encoder 1 with triggering of measurement through falling edge at digital input TP1.
124.9 Encoder 1 trigger digital input TP2 pos. edge revolutions
Revolutions Encoder 1 with triggering of measurement through rising edge at digital input
TP2.
124.10 Encoder 1 Trigger digital input TP2 pos. Edge Angle
Angle Encoder 1 with triggering of measurement through rising edge at digital input TP2.
124.11 Encoder 1 trigger digital input TP2 neg. edge revolutions
Revolutions Encoder 1 with triggering of measurement through falling edge at digital input
TP2.
124.12 Encoder 1 Trigger digital input TP2 neg. Edge Angle
Angle Encoder 1 with triggering of measurement through falling edge at digital input TP2.