Baumuller b maXX BM5800 - Page 232

Configuration
Parameter manual b maXX BM5800
Document No.: 5.16029.03 Baumüller Nürnberg GmbH
232
of 814
3.4
The corresponding bit changes its status with each new measurement.
Bit Meaning
0 Toggle bit to signal "New measured value in channel "Encoder 1 with Trigger
digital input TP1 positive edge" exists.
0->1, 1->0: new measured value exists
1 Toggle bit to signal "New measured value in channel "Encoder 1 with Trigger
digital input TP1 negative edge" exists.
0->1, 1->0: new measured value exists
2 Toggle bit to signal "New measured value in channel "Encoder 1 with Trigger
digital input TP2 positive edge" exists.
0->1, 1->0: new measured value exists
3 Toggle bit to signal "New measured value in channel "Encoder 1 with Trigger
digital input TP2 negative edge" exists.
0->1, 1->0: new measured value exists
4 Toggle bit to signal "New measured value in channel "Encoder 1 with Trigger
Zero Pulse positive edge" exists.
0->1, 1->0: new measured value exists
5 Toggle bit to signal "New measured value in channel "Encoder 1 with Trigger
Zero Pulse negative edge" exists.
0->1, 1->0: new measured value exists
6 Toggle bit to signal "New measured value in channel "Encoder 2 with Trigger
digital input TP1 positive edge" exists.
0->1, 1->0: new measured value exists
7 Toggle bit to signal "New measured value in channel "Encoder 2 with Trigger
digital input TP1 negative edge" exists.
0->1, 1->0: new measured value exists
8 Toggle bit to signal "New measured value in channel "Encoder 2 with Trigger
digital input TP2 positive edge" exists.
0->1, 1->0: new measured value exists
9 Toggle bit to signal "New measured value in channel "Encoder 2 with Trigger
digital input TP2 negative edge" exists.
0->1, 1->0: new measured value exists
10 Toggle bit to signal "New measured value in channel "Encoder 2 with Trigger
Zero Pulse positive edge" exists.
0->1, 1->0: new measured value exists
11 Toggle bit to signal "New measured value in channel "Encoder 2 with Trigger
Zero Pulse negative edge" exists.
0->1, 1->0: new measured value exists
12…31 Reserved