Error messages and troubleshooting
Parameter manual b maXX BM5800
Document No.: 5.16029.03
755
of 814
4
2749 Cam file version is unknown The controller firmware doesn't know the version of the transmitted
cam file.
m Consequence:
The cam file is rejected.
No response
2750 To many revolutions per segment
defined
One of the transmitted curve segments was defined for more than
65535 master or slave revolutions.
m Consequence:
The cam file is rejected.
No response
2800 No identification in the DPRAM Header No identification found in the DPRAM Header (DEADBEEF) No response
Error
num-
ber
Brief error text Error description Default set-
ting for
Error
Response
To Next Page
Loading...