Install the Secondary Peri-Pump | 47
Kit components include:
l 1 - additional Peri-pump
l 2 - small tab to secure unit to the instrument
l 3 - additional dispense cassette bracket
l 4 - interface cable to connect unit to the instrument
l 5 - MultiFlo FXOnly: extra stainless-steel bracket to replace #2
l Also note the screwdriver, Allen (hex) wrench, and shoulder screw shipped with
the accessories.
You will need:
l Second Peri-pump Kit components (shown above)
l Philips head screwdriver (small)
l Small flat screwdriver
Install the additional Peri-pump:
MultiFlo FX ONLY: Change the bracket on the
front of the Secondary Peri-pump unit:
l Remove the black plastic tab and replace
it with the stainless-steel bracket
shipped in the kit, using the same
screws. (See #5 above.)
BioTek Instruments, Inc.
To Next Page
Loading...
