Brother HL-S7000DN - Page 334

3-166
Confidential
(3) Rotate the Eject cover bush in the direction of the arrow 3a to pull it out from the Stacker
frame L.
Fig. 3-218
(4) Open the Stacker rear as shown in the figure to slide the Boss on the left side to remove it.
(5) Remove the Stacker rear from the Stacker paper eject ASSY in the directions of the
arrows 5a and 5b in this order.
Fig. 3-219
3b
3a
3a
Stacker frame L
Eject cover bush
Boss
Boss
Boss
5a
5b
4a
4b
<Front>
Stacker rear
Stacker rear
Stacker paper eject ASSY
Stacker paper
A view
<A view>
eject ASSY