2-12
Confidential
3. ERROR INDICATIONS
3.1 Error Codes
The shaded errors do not occur by normal use, and are considered to occur due to noise
around the installation site, fluctuation of power-supply voltage or software failure.
Error
Codes
Problem
Refer
to:
0B00 ---
0C01 Time out access request for
server due to such reason as
wrong server address/network
unconnected/server is not
activated.
2-36
0C02 Time out access request for
server due to such reason as
wrong user name/wrong
password/inconsistency in the
date of the machine and server.
2-36
0C03 Time out access request for
server due to such reason as
wring directory name/no write
authority for directory/write lock
on file.
2-36
0C04 Time out access request for
user due to such reason as
machine watch (RTC) has not
been set and time has not been
obtained at SNTP.
2-36
0D00 Unable to save data because
there is no space in the storage
data area of memory.
2-37
0D01 Failed read/write data in the
storage I/O.
2-37
0E00 ---
1000 ---
1100 ---
1200 ---
1600 ---
1700 When feeding paper to MP tray,
the paper width sensor
detected that the paper tray is
open.
2-38
1800 ---
1900 ---
1A00 ---
1B00 ---
1C00 ---
1D00 ---
1E00 ---
1F00 Detected when 4 or more
optional tray was connected.
2-38
2000 ---
2001 Detected some sort of
communication problem
between main PCB and engine
PCB.
2-38
2002
Failed to communicate between
main PCB and tray 2 relay PCB.
2-39
2003
Failed to communicate between
main PCB and tray 3 relay PCB.
2-39
2004
Failed to communicate between
main PCB and tray 4 relay PCB.
2-39
2005 Failed to communicate between
main PCB and optional output
PCB.
2-39
2006 ---
2100 ---
Error
Codes
Problem
Refer
to:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
