5-39
Confidential
1.4.16 Ink replacement purge inside head (Function code 49)
<Function>
This is a purge operation performed when printing failure is not improved with the cleaning
mode of the function due to the machine left for a long period with the AC cord being
unplugged. Ink inside a head is replaced with this purge operation.
<Operating procedure>
(1) Press the 4 and 9 buttons in this order in the initial state of the maintenance mode.
"CLEANING ALL" is displayed on the LCD.
(2) Press the or button to select the head to be cleaned.
Available modes to select are as follows.
CLEANING ALL: Clean both the ink head and pre-coat head.
CLEANING FK: Clean the ink head.
CLEANING FG: Clean the Pre-coat head
(3) Press the Go button. "Cleaning" is displayed on the LCD and ink inside the head is
replaced. When cleaning is finished, "Completed" is displayed on the LCD, and the
machine automatically returns to the initial state of the maintenance mode.
To Next Page
Loading...
