Brother HL-S7000DN - 6. WHEN REPLACING DRIVE SWITCHING UNIT

4-29
Confidential
6. WHEN REPLACING DRIVE SWITCHING UNIT
<What to do when replacing the Drive switching unit>
■ Before replacement
- Nothing in particular
■ After replacement
- 6.1 Adjustment of Waste Ink Box Sensor (Maintenance Mode: Code 19)
- 6.2 Supply of Water
- 6.3 Supply of Ink to Drive Switching Unit and Check of Ink Leak
- 6.4 Resetting of Drive Switching Unit Counter
- 6.5 Attachment of Side Cover L
<What you need to prepare>
A waste ink box that is not full of waste ink.
Note:
As you check ink leak after the replacement, check the following without attaching the
side cover L. After the check, attach the side cover L.