Brother HL-S7000DN - 2. WHEN REPLACING INK HEAD;PRE-COAT HEAD

4-7
Confidential
2. WHEN REPLACING INK HEAD/PRE-COAT
HEAD
<What to do when replacing the Ink head/Pre-coat head>
■ Before replacement
- 2.1 Draining Ink from Head (Maintenance Mode: Code 17)
■ After replacement
- 2.2 Supplying Ink to Head and Checking Ink Leak (Maintenance Mode: Code 16)
- 2.3 Missing Dot Check (Maintenance Mode: Code 68)
- 2.4 Head Inclination Adjustment (Maintenance Mode: Code 68)
- 2.5 Adjustment of Print Start Position (Maintenance Mode: Code 68)
- 2.6 Printing of All Check Patterns
- 2.7 Tightening of Flange nut M3
- 2.8 Resetting of Each Head Counter
<What you need to prepare>
(1) A USB cable
(2) Create a temporary folder on the C drive on the computer (Windows
®
XP or later).
(3) The download utility (FILEDG32.EXE)
Copy it into the temporary folder created on the C drive.
(4) The Brother maintenance USB printer driver (MaintenanceDriver.zip)
If the maintenance printer driver is not installed, copy it into the folder created on the C
drive, decompress and install it.