Brother HL-S7000DN - 8. WHEN REPLACING MAINTENANCE DRIVE PCB ASSY; 8.1 Adjustment of Waste Ink Box Sensor (Maintenance Mode: Code 19)

4-37
Confidential
8. WHEN REPLACING MAINTENANCE DRIVE
PCB ASSY
<What to do when replacing the Maintenance drive PCB ASSY>
■ Before replacement
- Nothing in particular
■ After replacement
- 8.1 Adjustment of Waste Ink Box Sensor (Maintenance Mode: Code 19)
<What you need to prepare>
A waste ink box that is not full of waste ink.
8.1 Adjustment of Waste Ink Box Sensor
(Maintenance Mode: Code 19)
Refer to Chapter 4, "6.1 Adjustment of Waste Ink Box Sensor (Maintenance Mode: Code 19)"
and perform it.