5-46
Confidential
1.4.21 Setting by country (Function code 74)
<Function>
This function allows you to customize the machine according to language, function settings,
and worker switch settings.
<Operating procedure>
(1) Press the 7 and 4 buttons in this order in the initial state of the maintenance mode.
The present country code is displayed.
(2) Enter the 4-digit country code you wish to set using the ten-key pad.
(3) Press the Go button. The new setting is saved, and "PARAMETER INIT" is displayed on
the LCD. After the setting is saved, the machine returns to the initial state of the
maintenance mode.
(4) If you press the Cancel button while setting the code, the machine returns to the initial
state of the maintenance mode without saving the country code.
Setting by country code list
Note:
If there is a pause of more than one minute, the machine will automatically return to the
initial state of the maintenance mode.
Country HL-S7000DN
USA 0001
Brazil 0042
UK 0004
Australia 0006
New Zealand 0006
Japan 0047
To Next Page
Loading...
